top of page

Online Mastering for Indie and Alternative Records: What We Do, What We Deliver, What We Leave Alone

2 days ago
7 min read

Tapetown Studio masters indie and alternative records online: you send approved stereo mixes, or grouped stems, and we send back release-ready masters that keep the dynamics and the edge, loud enough for streaming without ironing the record flat. We master in-house, and we also work with Emil Thomsen at ET Mastering in Aarhus. Tapetown has studios in Aarhus and on Djursland, Denmark, and has worked with indie rock, post-punk, shoegaze and alternative music since 2011. We mix and master for artists across Scandinavia, Europe, the UK, the US, Canada and Australia, remotely, with attended sessions across time zones.


This post covers what mastering does for an indie or alternative record, when stem mastering helps, what we need from you, what you get back, how it pairs with mixing, and how quotes, currencies and time zones work from abroad. The service page is here: online mastering at Tapetown.


What mastering does for an indie record, and what it leaves alone

Mastering is the last step before release. It works on the finished stereo mix of each song, not on the separate tracks. We set the final level, even out the tone from song to song, set the gaps and fades, and deliver the files your distributor needs. On a single that is often a light pass. On an EP or an album it is also the job of making songs recorded on different days feel like one record.


What mastering leaves alone matters as much. We do not work from a pop template. No default tuning, quantizing or cleanup. Imperfections that carry feeling stay in the record. A loud cymbal crash that ends a song, tape hiss at the start, a distorted vocal: tell us it is on purpose, and it stays.


Mastering also cannot fix what belongs in the mix. If you can name the problem by instrument, like a vocal that disappears when the guitars come in, that is a mix note. We say so and send it back before mastering, rather than pulling the whole stereo file around to chase one part. The longer version of this is in Mixing vs Mastering: What Is the Difference?.


Loud enough for streaming, without flattening the record

Mastering follows the same principle as the mix: keep the dynamics, keep the edge, loud enough for streaming without ironing the record flat.


In practice that means we do not master to a number. Streaming services normalise playback, so a master pushed far louder than the platform's level is turned down again, and what you keep is the damage: a flatter, smaller record at the same playback volume. We set the level the song can carry. A dense guitar track and a quiet acoustic song on the same EP do not have to measure the same, and the contrast between them is part of the record. We check the masters at comparable listening levels, let the music decide, and read the meter second.


We work with digital tools and analogue hardware according to what the music needs. Some songs get a little EQ and gentle compression. Some get almost nothing, because they are already right.


Stem mastering, and when it helps

We offer stem mastering. It means working from four or five grouped stems, such as drums, bass, guitars and vocals, instead of one stereo file. It gives a little more reach: the vocal can come up a touch without lifting the cymbals with it.


It helps most when the mix was made elsewhere, the mixer cannot revisit it, and one balance is in the way. If the mix can still be opened, the fix often belongs there, and it will be simpler and cleaner. If you think your record is a case for stem mastering, say so when you get in touch and send the stereo mix as well. We will tell you honestly which it needs. For stems, export each group from the same start point, at the sample rate and bit depth you mixed at, with no processing on the mix bus.


What we need from you

  • The final stereo mix of each song, approved by the band, as a WAV at the sample rate and bit depth you mixed at. One approved mix per song, with a clear version name. For stem mastering, the grouped stems as well.

  • Headroom. Leave the peaks a few decibels below zero. The master is where the final level gets set.

  • No limiter on the mix bus. If you like the loud version, send two files: one without the limiter for us, one with it as your reference.

  • Two or three reference tracks, and a sentence on what you like about each.

  • Your release date, and the distributor's deadline if you know it. We plan backwards from there.

  • The number of tracks, the running order, and the gaps or crossfades you want.

  • A note on what is deliberate: differences in loudness between songs, the rough edges that belong.


If you need instrumentals, clean edits or other alternate versions, tell us at the mixing stage. Mastering cannot reliably make a clean instrumental from an ordinary stereo mix. Before you book an EP or album master, the checklist in Mastering an Indie EP or Album: What to Agree Before You Book covers running order, versions and deadlines.


What you get back

We deliver finished masters as stereo WAV files. Other formats are available: tell us what your release needs, and whether it is going to streaming, download, CD or vinyl. A vinyl master is not the same file as a streaming master, so say so early. Instrumental and alternate versions are delivered when they were prepared at the mixing stage.


After the first masters, we go through your notes together before the final files.


How it pairs with mixing at Tapetown

Tell us whether you need mastering on its own or alongside mixing. If we mix the record too, the master is planned while the mixes take shape: we know the running order, we know which contrasts are deliberate, and nothing gets lost in the handover. On a larger project we prefer to mix in blocks so the sound stays consistent across the whole record, and the master then has less to even out.


We master in-house, where Gustav Scheel masters, and we also work with Emil Thomsen at ET Mastering in Aarhus. KEXP's four sessions at SPOT Festival 2022 show the split in practice: KEXP's credits name Rasmus Bredvig at Tapetown as mix engineer and Emil Thomsen at ET Mastering for the mastering. Need the mix first? Start with online mixing at Tapetown, and we quote mixing and mastering together. Need mastering only? Go straight to online mastering.


Working with us from abroad

We are in Denmark, and we work online with artists worldwide. The price depends on the number of songs and the scope of the project, so we quote each project after we hear the mix, in Danish kroner (DKK), euros (EUR) or US dollars (USD). Send the music, the number of tracks and your deadline.


Attended sessions are arranged around your time zone, wherever you are: you listen in real time from your own studio and give notes as we go. For files, we have several transfer options and agree on the one that suits you when we start. Turnaround depends on what else is in the studio and how big the project is; tell us your release date when you get in touch and we plan from there. We work in English and Danish.


Records, and what others have said

Records mixed at Tapetown by Rasmus Bredvig include Catch the Breeze's *Glow* (Kundalini Records, 2018), recorded at Tapetown and engineered and mixed by Rasmus; FLOWERS' Doom City (2019), recorded and mixed by Rasmus at Tapetown; and Aztek's Delirious (2019), mixed by Rasmus. Those are mixing credits. Mastering follows the same approach as the mix: the dynamics and the edge stay. We master what we mix, and records mixed elsewhere that are sent to us.


SOON's self-titled album (Subroutine, 2022) was recorded by Rasmus at Tapetown. The Quietus put it on its albums of the year so far list in 2022: "the sound is intense and committed, and revealing very little slack". That is the kind of record we work on, and the kind of sound a master has to protect rather than polish.


Our sessions and records have been covered by more than 130 independent music publications in 19 countries since 2015, including Stereogum, Clash and The Quietus: Tapetown in the press.


Send us your mix

Share your mix, a few reference tracks and any release deadline. We listen, discuss the project and send a personal quote. Tell us whether you need mastering on its own or alongside mixing. Start on the online mastering page or send us a message.


Mastering FAQ

How much does online mastering cost, and in which currency?

The price depends on the number of songs and the scope of the project, so we quote each project after we hear the mix. Quotes are in Danish kroner (DKK), euros (EUR) or US dollars (USD).


Do you offer stem mastering?

Yes. We master from four or five grouped stems, such as drums, bass, guitars and vocals, when a stereo mix alone cannot get the balance right and the mix cannot be reopened. Send the stereo mix as well, and we will tell you which the record needs.


Who masters at Tapetown?

We master in-house, where Gustav Scheel masters, and we also work with Emil Thomsen at ET Mastering in Aarhus.


Which formats do you deliver?

Finished masters come as stereo WAV files. Other formats, and alternate versions prepared at the mix stage, are available on request; tell us what your release needs.


How long does mastering take?

It depends on the size of the project and what else is in the studio. Tell us your release date when you get in touch and we plan around it.


Can you master a mix made somewhere else?

Yes. Send the final stereo mix without a limiter on the mix bus, with headroom, plus references and your deadline. If something in the mix needs changing, we tell you before we start.

bottom of page