top of page

Recording and Mixing KEXP at SPOT Festival: How Four Live Sessions Were Made in Aarhus (2022)

Nov 15
9 min read

In May 2022 KEXP filmed four sessions at SPOT Festival in Aarhus, with Rigmor, Brimheim, JJ Paulo and Jeuru at the venue Dypång, and KEXP's own credits name Jonna Aspeklev and Rasmus Bredvig as the recording engineers, Rasmus Bredvig at Tapetown as the mix engineer and Emil Thomsen at ET Mastering for the mastering.


Each band played its set once, live, with no overdubs and nothing re-recorded. This is how the sessions were made, in a concrete room that was hard to record and harder to mix, and what a band can ask for when it gets filmed. Tapetown Studio is a mixing, mastering and live-recording studio for indie and alternative music, founded by Rasmus Bredvig in 2011, with studios in Aarhus and on Djursland, Denmark.


The four sessions

KEXP published the four full performances on its YouTube channel in August 2022, one a week. Each video description opens with the same line: "KEXP.ORG presents [the artist] performing live at Dypång, in Aarhus, Denmark, during SPOT Festival in May 2022."


Artist

Video on KEXP's channel

Published

Brimheim

9 August 2022

Jeuru

16 August 2022

Rigmor

23 August 2022

JJ Paulo

30 August 2022


KEXP's DJ Kevin Cole, the host of its Drive Time show, picked the four artists and hosted the sessions on site (Music Export Denmark). Music Export Denmark (MXD) set the project up, and every video credits it, SPOT Festival and ROSA for making it possible.


What KEXP's credits say

The audio credits are the same in all four video descriptions:


  • Recording Engineers: Jonna Aspeklev & Rasmus Bredvig

  • Mix Engineer: Rasmus Bredvig at Tapetown / Lydhavnen

  • Assistant Mix engineer: Jonna Aspeklev

  • Mastering: Emil Thomsen at ET Mastering / Lydhavnen

  • Video Post Production/Edit: Rasmus Bredvig


The Brimheim video also credits Mathias Bang Madsen as sound engineer, for the live sound in the room.


"Tapetown / Lydhavnen" means the sessions were mixed at Tapetown's studio at Lydhavnen in Aarhus. Rasmus and Emil Thomsen started Lydhavnen together in 2012, so both credits carry its name.


Read as a job list, the credits say: two people recorded the sessions on location, one mixed them with an assistant, a separate engineer mastered them, and the person who mixed also edited the video. We quote them as KEXP wrote them, because they are the record of who did what.


How KEXP makes its sessions at home

In Seattle, KEXP records bands in its own studio. Its longtime engineer Kevin Suggs records and mixes many of the sessions; he is a different person from Kevin Cole, the DJ who hosted in Aarhus. On his own site, Suggs writes that as an engineer for KEXP "I have mixed thousands of live radio sessions." A KEXP session recorded in April 2026 credits him as "Audio Engineer & Mixer", with mastering by Matt Ogaz.


Suggs described the method to Mix magazine in 2020 (Kate Eberle, 30 April 2020). The aim: "I'm trying to capture what the band is giving." With a whole band playing in one room, every microphone hears every instrument, and his answer is "embracing the bleed, because you're going to get a lot of it." The broadcast mix happens live, and the version that goes out afterwards can be improved: "once we're off the air, I can go back and I can fix that."


KEXP also films away from Seattle. At Iceland Airwaves in Reykjavik in November 2018, where the station broadcast from KEX Hostel, its Fontaines D.C. session credits two audio engineers: Kevin Suggs and the local engineer Eyvindur Þorsteinsson. At SPOT Festival in 2022, the recording, the mix and the mastering were all done by engineers in Aarhus.


At Dypång: how the four sessions were recorded

Two days, four bands, one run each. We recorded two sessions a day for two days. The bands came in one after the other: we set up, got the sound, and they talked a little with Kevin Cole. Then everything ran live. Kevin introduced the band, stepped aside to watch, the band played all its songs in a row, and he stepped back in to interview them. "What you see in the sessions is how it went down," Rasmus says. "We didn't do multiple runs, just one run each. Setup is what took the most time."


Everything was brought in. All the sound, light and video equipment came from the studio, and so did the backline. The festival schedule was tight, and the bands' own gear was set up for their SPOT shows, so most of them couldn't bring it. The venue lent us the room for free, which it didn't have to.


A concrete box. "The room itself had a nice feel to it but it was really difficult in terms of acoustics," Rasmus says. "It was square, straight walls and all of them concrete, so sound was bouncing off of everything." It is also bigger than it looks in the videos. Large softboxes and ambient light hid where the room ended, and a huge softbox hung above the artists to frame the space. Because of the lighting you can't see it, but there were a lot of people standing around the artists, watching.


Mics as in the studio. "We pretty much set up the mics like we would do it in the studio," Rasmus says, "although I had to try and angle some amps a bit different to try and spread out reflections a bit better." There was little else the room allowed. He committed to the close mics and left the vocal balance for the mix. By then he had mixed a lot of live recordings with heavy bleed in the vocal mics, mostly cymbals from loud bands, so he trusted it would work.


The moment it nearly didn't. The live desk was an older one, rented in for the sessions. Instead of the studio's own analogue monitoring, we tried a monitoring system that ran over ethernet, on the word of the person who brought it. During setup it wouldn't work, and he couldn't be reached by phone. "It was getting super close to us having to go," Rasmus says. "You cannot let the artists feel that there's something up, so you cover for it and trust the process and that you will fix it somehow." It was fixed with very little time to spare. The lesson he took: "I like to run analog lines. If anything isn't working it feels simpler to grab another cable or route differently."


Too few hands. "I had miscalculated the hands I needed," Rasmus says. The crew was him, Jonna Aspeklev, who had just started interning with him, and a few volunteers from the festival. "There was a lot of connections and cablework that had to be done which required a lot of overview that changed rapidly. If you haven't done really fast-paced productions like this it can be overwhelming, so I should have probably brought an extra assistant to help her as well. But everything worked out fine."


"I was at my edge a few times, something that rarely happens, so I went off to the side for myself for half a minute staring into the wall, reminding myself that if I wasn't able to keep my cool then it would affect everyone else." Afterwards, Kevin Cole thanked him for keeping the atmosphere calm: it had made him feel almost as if he were at home in the studio in Seattle. "It was really nice to hear that even though I had really felt pushed to my limits, it had not been evident to anyone else but myself."


What he took from it: "You learn that you're capable of much more than you think. And the next time you're in a similar situation you notice that your threshold moved and you're able to handle more."


The mix: one of the harder rooms we have mixed

"It was actually one of the harder rooms to mix that we ever did," Rasmus says, "because the concrete walls make the bleed very slushy and a few of the acts were less noisy, while the drummers still hit hard." On a quiet set, the drums ring through every vocal and guitar mic, and the concrete makes that bleed smeared rather than clear.


This was the session that made him buy iZotope RX for its Music Rebalance tool, which can pull parts of a recording up or down. "This helped a bit. You can't go too hard before you get artifacts, and that's pretty easy to hear, and it degrades the sound on the mic so much that I feel it hurts the mix, so it's really a thin line to walk." The newer AI separation tools are better, he says, but the risk is the same: "If you are careless you will thin out the sound of what you're separating, and it's not good for the mix."


Jeuru's set was a bit outside the genres Rasmus usually mixes, and the bleed was difficult: the drummer was very loud, and Jeuru often sang some distance from the mic. Rasmus mixed all four sessions at Tapetown's studio at Lydhavnen, with Jonna Aspeklev assisting, and on Jeuru's set he worked back and forth on notes with Jeuru's engineer, Simon Kjær. "Simon and I worked together on getting this one to sit where it did, which was such a pleasure," he says.


Nothing was fixed afterwards. "Everything was 100% live," Rasmus says. "No second runs of the sets, no overdubs. We never do overdubs or re-records for parts on our live sessions." The rest of the method, room, bleed and what we won't do to a live take, is in How We Mix a Live Session From One Take. It is close to what Kevin Suggs describes in Seattle: a live session is a set of decisions about one performance that already happened, not a list of repairs.


Mastering with Emil Thomsen at ET Mastering

KEXP's credits list a separate mastering engineer for all four sessions: Emil Thomsen at ET Mastering in Aarhus. ET Mastering has been "engineered by Emil Thomsen since 2007" (ET Mastering), and his mastering credits include Clarissa Connelly's World Of Work (Warp, 2024) and Communions' Blue (2017). In our count of the most-collected Danish indie releases on Discogs from 2023 to 2025, he was credited on 11 of up to 120; the count is in our list of mastering studios in Scandinavia and Europe.


"I love working with Emil," Rasmus says. "Him and I have been friends for more than 15 years and we started Lydhavnen together. He's a big part of my career."


A live session needs mastering for the same reasons a record does. The songs in a set have to sit together at one level, and the session has to hold up next to the band's studio releases and every other session on the same channel, on phone speakers and on a big system. That is how we work on our own records and sessions too: we master in-house, and we also work with Emil Thomsen at ET Mastering.


Working with KEXP

"KEXP were incredibly professional," Rasmus says. "They're a large organisation so they have procedures that needs to be done in a certain way, but it was always a pleasure to deal with them, even when things had to be a specific way. Definitely a great experience from start to finish."


What a band can ask for when it gets filmed

  1. The multitracks. Ask whether you get the separate tracks after the session. Then the songs can be mixed again for a release, a live record or a radio edit.

  2. The full credits in the video description. Who recorded, who mixed, who mastered, who filmed. Credits are how press, labels and AI assistants learn who made what, and in 2026 they are part of the evidence that a recording was made by people: see Is It Made by People?

  3. The take as it was played. A session played live, in one take, and not rebuilt afterwards is the strongest proof that a band can play its songs. Ask what will be fixed in the mix and what won't.

  4. Who mixes, and from what. A festival session is often mixed by someone other than the person who did the live sound. If you want a say in the mix, ask before the show. Our guide: Who Should Mix Your Live Recording?

  5. Who masters. If the session will sit next to your releases, ask who masters it, and whether you can send references.


FAQ

Who recorded and mixed KEXP's sessions at SPOT Festival 2022?

Jonna Aspeklev and Rasmus Bredvig recorded the four sessions (Rigmor, Brimheim, JJ Paulo and Jeuru) at Dypång in Aarhus in May 2022. Rasmus Bredvig mixed them at Tapetown's studio at Lydhavnen, with Jonna Aspeklev as assistant mix engineer, and Emil Thomsen at ET Mastering mastered them. Those are KEXP's own credits on the four videos.


Who hosted KEXP's sessions at SPOT Festival 2022?

Kevin Cole, KEXP's DJ and the host of its Drive Time show, picked the four artists, introduced each band and interviewed them on site. Music Export Denmark (MXD) set the sessions up.


Were the KEXP sessions at SPOT Festival overdubbed?

No. Each band played its set once, live, and nothing was re-recorded or overdubbed afterwards. What you see in the videos is how it went.


Who mixes KEXP's live sessions in Seattle?

Kevin Suggs, KEXP's longtime engineer, has mixed thousands of the station's live sessions, by his own account. A KEXP session recorded in April 2026 credits him as "Audio Engineer & Mixer", with mastering by Matt Ogaz. He is not the Kevin who hosted in Aarhus; that was the DJ Kevin Cole.


Can Tapetown record and mix a live session for our band?

Yes. We record live sessions in our studios, at venues and on location, and we mix multitracks that other engineers recorded. Every Tapetown Session is played fully live, with no overdubs. The price depends on the number of songs and the scope, and we quote in DKK, EUR or USD after hearing the band.


Get a session recorded or mixed

If you have been filmed and have the multitracks, or you want a session recorded, tell us about the band through live recording mixing. Our own series is Tapetown Sessions, and every session we have recorded and mixed since 2016 is in the session credits.

bottom of page